ABRALINE | Abrasive Bulk Transfer Systems
ABRALINE IV and ABRALINE V Abrasive Transfer Systems
PRECISION CUTTING PERFORMANCE FOR SMOOTH, CLEAN CUTS!
Production reliability requires constant monitoring of the entire cutting process. An economical and successful cutting process depends greatly on a constant abrasive flow rate. This fact becomes even more important when cutting brittle materials such as stone, marble or glass.
Abrasive flow monitoring saves time and costs
Our ABRALINE feeding systems precisely monitors the availability of sufficient abrasive closely during the entire cutting process. This protects your valuable material from damage and saves unnecessary costs and time. Its concept assures process stability, security and a very high degree of reliability.
The convenient solution for different demands
KMT offers the ABRALINE feeding system in two different sizes suitable for different requirements. The smaller version ABRALINE V with a 425 kg abrasive reservoir is sufficient for ensuring the abrasive feed for occasional cutting needs. For large cutting machines which operate continuously and with multiple cutting heads, we recommend the model ABRALINE IV Advanced – its silo volume captures a conventional 1.000 kg / 1 to bag of abrasive.
KMT WATERJET PRODUCTS CATALOG
Request a Quote
ABRALINE IV | Abrasive Vessel
TECHNICAL DATA
Max. Flow Rate: 4,000 g/min
Continuous Operating Pressure: 2–6 bar
Supply Voltage: 115–240 V
Vessel Volume: 24 liters
Silo Volume: 1,000 kg
Length: 1,060 mm
Width: 1,060 mm
Height: 1,915 mm
Net Weight: 250 kg
ABRALINE V | Abrasive Vessel
TECHNICAL DATA
Max. Flow Rate: 4,000 g/min
Continuous Operating Pressure: 2–4.4 bar
Supply Voltage: 110–240 V
Vessel Volume: 25 liters
Silo Volume: 425 kg
Length: 858 mm
Width: 858 mm
Height: 1,392 mm
Net Weight: 112 kg