KMT Waterjet NEOLine Series 55,000 PSI/3,800 bar Intensifier Pumps for cutting metal, cutting aluminum and much more. 

KMT Waterjet offers the most extensive line of abrasive water jet intensifier pumps to provide maximum performance and maximum productivity for your needs. The KMT NEOLine Series is the newest in our product lines, which also include the Streamline SL-VI Series (60,000psi/4,100bar) and the Streamline PRO Series (90,000psi/6,200bar). All of KMT pumps offer abrasive water jet cutting high pressure up to 90,000psi for cutting metal, cutting aluminum and much more.

KMT NEOLine® 55,000 PSI/3,800 bar Intensifier Pumps


NEOLine® 40i INTENSIFIER PUMP The NEOLine® 40i pump uses KMT proven intensifier technology

The KMT Waterjet NEOLine® 40i Intensifier Pump is the NEW low cost option for multiple abrasive waterjet cutting applications and pure water jet cutting. This is the perfect solution for job shop cutting whether you are cutting metal, cutting aluminum or cutting titanium.

The NEOLine® 40i pump uses KMT proven intensifier technology for superior performance with less maintenance. The durable and reliable NEOLine® 40i pump is ideally suited for small job shops, sign and automotive shops requiring the versatility and flexibility found only with waterjet cutting.

Download the NEOLine 40i Flyer (602 kb) » 



Autoline® II - High Speed, Self-aligning, Cutting Nozzle!Autoline II Cutting Head
Independent tests prove the KMT Autoline® II abrasive cutting nozzle cuts faster and at a lower cost than any other nozzle. Tests performed by the Missouri University of Science & Technology showed that the Autoline® II design achieved the best overall cutting performance for speed and efficiency.

In all abrasive cutting heads, there are three areas of wear: the orifice, the mixing chamber, and the focusing tube. The Autoline® II enables the individual replacement of any wear component, maximizing efficiency to achieve the lowest operating cost. 

Download the Autoline® II Flyer with Operating Costs Chart (1.5 mb) »


IDE® II - Take Your Cutting Head to the Next Level!IDE II Cutting Head

The KMT Integral Diamond Eductor II consistently demonstrates superior performance and reduced operating cost when compared to competitive brand abrasive cutting heads.

KMT’s expertise in diamond orifice manufacturing brings you a superior one piece cutting head that has revolutionized the waterjet cutting industry.

  • Up to 50% more productivity-no maintenance down time
  • 10 to 20 times greater mean time between failure
  • Superior edge quality

Reduced Operating Cost
The integral diamond orifice reduces operating costs with faster cutting, extended focusing tube life and dramatically reduced downtime. The KMT Integral Diamond Eductor II has demonstrated 1000+ cutting hours in the field for many applications. For more information on the operating costs and cutting speeds download the IDE® II Diamond Cutting Nozzle Flyer (1.4 mb) »




Proven Performance at Extreme Pressures AQUALINE® WATER-ONLY CUTTING NOZZLES

Pure water cutting applications are among the most demanding of subcontracting jobs in the industry. Pure water cutting applications usually work with significantly higher cutting speeds compared to those of abrasive cutting.

The high pressure Aqualine® nozzles are designed to be used in a wide range of applications, including high-speed robotic motion systems, high-volume slitting operations and demanding, custom-cutting operations, and deliver greater performance for longer production runs with many on-off cycles.

Download the Aqualine® flyer (231 kb) »


FEEDLINE V Abrasive Metering System - Optimized Abrasive ConsumptionKMT Waterjet Feedline V Abrasive Metering

Stable and repeatable operating parameters are a fundamental requirement for high-quality waterjet cutting. This applies in particular to abrasive applications used to cut brittle materials, where a constant flow of abrasive is simply a must.

KMT Waterjet Systems responded to this demand by developing the FEEDLINE V abrasive metering system. Controlled through a central CNC controller or a potentiometer, the FEEDLINE V supplies the cutting head with the optimized flow of abrasive. This helps save material and costs.

Download the FEEDLINE V Flyer (177 kb) »

FEEDLINE PRECISION - Variable Control Dial for Precision and Flexibility

The FEEDLINE PRECISION variable dial control abrasive vessel has a full spectrum dial, notched in 1/10 lb. (.05 kg) increments, to deliver precise flow control of abrasive from 0 to 2-1/2 lbs.(1.13 kg)/min. for cutting a variety of materials and thicknesses. The innovative Dial-It-In feature delivers flexible, economical and accurate delivery of abrasive to the cutting nozzle.

Because the FEEDLINE PRECISION delivers an easily adjustable, accurate feed of abrasive, greater efficiencies are achieved and costs are reduced.

Download the FEEDLINE PRECISION Flyer (1.1 mb) » 

ADS SERIES HOPPERS - Continuous Level Monitoring for Efficient Production Process

The KMT ADS SERIES HOPPERS precisely monitor the availability of sufficient abrasive closely during the entire cutting process. This protects your valuable material from damage due to lack of abrasive and saves unnecessary cKMT Waterjet ADS SERIES HOPPERS Abrasive deliveryosts and time.

KMT ADS SERIES HOPPERS are available in 500 lb. (227 kg) & 2,000 lb. (907 kg) sizes and loading areas allow individual 100 lb. (45 kg) bags of abrasive to be fed through the integrated sieve lid. It is easily accessible and the abrasive can be loaded, even while cutting, by only removing the top cover. The integrated sieve ensures that no contaminated particles maybe loaded.

LOAD ABRASIVE WHILE CUTTING! (No need to stop cutting to add more abrasive)

Download the ADS SERIES HOPPERS Flyer (207 kb) »

PSC VALVES, FITTINGS & TUBING (VFT)KMT Waterjet  PSC valves, fittings and tubing

The KMT line of VFT, Precision System Components (PSC) were designed to work with the KMT Streamline line pumps and other ultra high pressure applications. 

The KMT Series of 60,000 PSI/4,137 bar valves, fittings and tubing are made for durability, precision under pressure and stocked for quick delivery. 

Download the KMT PSC Parts catalog (2.2 mb) »