NEW! KMT Waterjet PRO 50 | LOWEST COST PER PART!
WHY PAY MORE TO CUT LESS PARTS?
The PRO 6.200 bar/50 HP Pump will significantly increase cutting productivity by up to 40% over industry standard 4.137 bar/50hp cutting speeds. The PRO 50 is designed for a lower investment while still delivering maximum productivity, profitability and extended performance cutting at 6.200 bar. KMT PRO 50 BROCHURE PDF >
RESOURCE SAVINGS
PRO pumps require less water, abrasive and electricity for the same part versus conventional 4.000 bar cutting. Operating at a pressure rates of up to 6.200 bar also increases the production capacity of a company, utilizing the exact same machinery footprint vs a conventional 4.000 bar cutting system. Even existing 4.000 bar systems in the field can easily get upgraded to 6.200 bar.
The above saving rates are in reference to the following cutting job:
Material: Stainless Steel | Thickness: 25,4 mm (1 inch) | Edge Quality: Fine
Cutting Speeds: @ 6.000 bar: 46 mm/min (1,81 ipm) | @ 4.000 bar: 33 mm/min (1,29 ipm)
Water Orifice Sizes: @ 6.000 bar: 0,25 mm (0,010 inch) | @ 4.000 bar: 0,35 mm (0,014 inch)
Abrasive Flow Rates (80 Mesh): @ 6.000 bar: 400 g/min (0,88 lb/min) | @ 4.000 bar: 650 g/min (1,43 lb/min)